Creality K1
Enclosed CoreXY 1.75 mm printer. Official support lists PLA, PETG, ABS, TPU95A and some fiber-filled variants with a 300 °C hotend.
Manufacturer snapshot
- Brand
- Creality
- Filament diameter
- 1.75 mm
- Build volume
- 220 × 220 × 250 mm
- Max hotend temperature
- 300 °C
- Max build-plate temperature
- 100 °C
- Enclosure
- Enclosed (passive chamber heat; no dedicated chamber heater in stock config)
- Material system note
- Single direct-drive extruder. Multi-color is typically pause-and-swap unless you add a separate multi-material system.
- Manufacturer listed ideal / supported families
- PLA, PETG, ABS, TPU95A, PA-CF, PLA-CF (per Creality K1 support/spec listings)
- Manufacturer caution / not recommended
- Treat abrasive CF filaments as nozzle-wear risks; confirm current nozzle material on your unit before heavy abrasive use
Creality K1 support center specifications · Recorded 9/14/2026
Printer specifications are not an endorsement of an unverified product or spool. Always re-check the manufacturer page before buying filament for a critical job.
What to verify before you buy filament
- Enclosure is helpful for ABS, but chamber temperature is passive — large ABS/ASA parts may still warp.
- For PLA, many users print with the lid open for cooling — follow Creality guidance for your filament.
- Confirm hardened vs brass/copper nozzle before CF-filled filament.
- Match Creality Print / third-party profiles to the exact filament brand and diameter.
Related on FilamentBridge: PLA · PETG · ASA · TPU · How we check compatibility · Shop